| 2/RCM-133-8A-10-SS
Kodiak Al-Ko/Rockwell One Axle Slipover Disc Brake Set stainless steel rotor/caliper (fits 865 idler hub with 5/8" wheel bolts)
PART NO.
DESCRIPTION
ITEM
Reference
#42 Brake Flange
2
E-coated caliper mounting bracket for Al-Ko/Rockwell 8K axles
3
Dacromet coated caliper mounting bracket for Al-Ko/Rockwell 8K axles
3
Stainless steel caliper mounting bracket for Al-Ko/Rockwell 8K axles
3
Reference
1/2-20UNF x 1 1/4 Hex Bolt
4
Reference
1/2" Lock Washer
6
Drive-In Wheel Stud 9/16" X 2.5"
8
Drive-In Wheel Stud 5/8" X 3.165"
8
Grease Seal (472920 National)
13
13" rotor automotive finish (fits 865 idler hub with 9/16" wheel bolts)
14
13" E-coated rotor (fits 865 idler hub with 9/16" wheel bolts)
14
13" Dacromet rotor (fits 865 idler hub with 9/16" wheel bolts)
14
13" Stainless Steel rotor (fits 865 idler hub with 9/16" wheel bolts)
14
13" rotor automotive finish (fits 865 idler hub with 5/8" wheel bolts)
14
13" E-coated rotor (fits 865 idler hub with 5/8" wheel bolts)
14
13" Dacromet rotor (fits 865 idler hub with 5/8" wheel bolts)
14
13" Stainless Steel rotor (fits 865 idler hub with 5/8" wheel bolts)
14
Rotor/hub 8K polycarbonate cap and plug
17
Oil lube plug for 8K - 14K, polycarbonate cap
18
Loaded E-coated caliper for 13" rotor; ceramic pads; nickel chrome piston
19
Loaded dacromet coated caliper for 13" rotor; ceramic pads; stainless steel piston
19
Loaded dacromet coated caliper for 13" rotor; ceramic pads with stainless steel backing plate; stainless steel piston
19
Loaded stainless steel caliper for 13" rotor; ceramic pads with stainless steel backing plate; stainless steel piston
19
E- Coated Caliper with 2 - 2 1/2" nickel chrome plated pistons; ceramic pads; with mounting clips
19
8K axle - 4 bolt hole (square pattern); 0.313 thickness
N/S
CALIPER REPLACEMENT PARTS
PART NO.
DESCRIPTION
ITEM
Stainless Steel Guide Bolt Sleeve
20
Stainless steel guide bolt (M11 x 1.5) w/Thread Locker (5/16" Allen or 1/2" Hex)
21
Friction Pads (Ceramic standard on Dacromet coated calipers)
N/S
Friction Pads (Ceramic with stainless steel backing plate - standard on stainless steel calipers)
N/S
Ceramic pad for 2250 and 338HD disc brake caliper
N/S
2 1/2" Stainless Steel Piston; standard on dacromet coated and stainless steel calipers
N/S
2 1/2" Nickel Chrome Piston; standard on E-coated calipers
N/S
Silicone Dust Boot with stainless steel compression ring
N/S
Adapter Port 90 degree 1/8" NPT to 3/16" FIF
N/S
Brass Bleed Port (1/4"-28 Bleed Screw w/1/8" NPT Adapter
N/S
1/8" Brass Pipe Thread Plug
N/S
EPDM Bushing For Guide Bolt Sleeve
N/S
O-ring for Guide Bolt Sleeve (Use For OLDER Design)
N/S
Disc Brake Caliper Rebuild Kit- includes 1 boot, 2 bushings, 2 guide bolts, 1 seal and 1 stainless steel piston
N/S
Replacement clip and flange bolt for DBC-2250 and DBC-338HD caliper (2 clips, 2 bolts).
N/S
| 
